One way to give a room a quick refresh is to update the walls. Your update could be as simple as a new coat of paint, a new wallpaper, or something a little more involved that adds texture and interest to the room. Like a board and batten wall that will add a chic look to any room. If you’ve never heard of a board-and-batten wall, that’s okay! We’ll go over what it is and how to add it to your home in this easy DIY tutorial.
What is a Board-and-Batten Wall?
A board-and-batten wall is a classic type of paneling that typically only covers the bottom half of a wall. To create a board-and-batten wall, install wide, vertical boards and fasten narrow battens over the gaps. It’s a simple project to complete, and no matter what type of wall updates you make, it’s always easier if you use an accent wall. Why? Accent walls only require you to change one wall in the room. So, this project will only alter one half of one wall and it won’t take long at all.
What You Need
Use this checklist of supplies to gather your materials. You’ll need:
- 1×4 at 8 feet or 12 feet
- 1×2 at 8 feet or 12 feet
- 1.25-inch brad nails
- Construction adhesive
- Paintable Caulk
- Spackle
- Paint
- Paint roller and tray
You will also need a few tools to complete this project, but don’t let this list intimidate you. This is a simple 10 -step project. Here are the tools you’ll need:
- milter saw
- level
- brad nailer
- wood chisel
- Utility knife
- Prybar and hammer
- measuring tape.
You might also like: David Hobbs Honda: CARFAX 2021 Dealer Of The Year
How-to Guide
- Start by removing the existing baseboard on the wall you’ve chosen.
- Replace the old baseboard with the new one using brad nails.
- Attach the middle horizontal board along the wall studs. Position it 48 inches from the top of the baseboard.
- Decide how much spacing you want between each vertical board. Mark the wall to indicate their placements.
- Measure the length for each batten, cut, and then attach the batten using construction adhesive.
- Install the top board directly on top of the middle board to create a ledge.
- Spackle and caulk all holes and cracks.
- If you don’t have pre-primed boards, prime the wall.
- Paint the board and batten wall.
- Let the paint dry and enjoy your new board and batten wall!
If you complete a lot of home improvement projects and you need a new truck to carry all of your tools and supplies, check out the 2022 Honda Ridgeline at David Hobbs Honda.